Acre (soil weight) | (2024)

FAQs

How much does 1 acre of soil weigh? ›

To determine the weight of dry soil in an acre furrow slice, multiply 82.99 pounds by 24,394 cubic feet for a total weight of 2,024,458 pounds. Typically, this number is rounded off to 2,000,000 pounds of soil per acre furrow slice.

“An acre of soil measured to a depth of 6 inches weighs approximately 2,000,000 pounds, which means that 1 percent organic matter in the soil would weigh about 20,000 pounds per acre.

An acre furrow slice is the volume or soil in an acre of topsoil 6-7 inches deep. The estimated average weight of soil in an acre furrow slice is 2,000,000 lbs (1,000 tons).

1 acre-foot of soil = 2,000 tons (approximate @ 92 lbs/cu. ft.)

A 40 pound bag of topsoil usually contains about 0.75 Cubic Feet of soil. There are 25.71404638 Dry Quarts in a Cubic Foot, so a 25 quart bag of potting soil would equal approximately 1 Cubic Foot. If you are filling pots, you will be fine. If you are spreading it on a lawn of any significant size, it will disappear.

A cubic yard of loose, dry topsoil weighs around 2,100 lb (950 kg) depending on its composition. If it's wet, it can be as much as 3,000 lb (1,400 kg). A yard of topsoil usually costs between $10 and $50 and can cover a 100 square foot (9.3 square meters) area 3 in (7.6 cm) deep.

From Area x depth you can fine the volume of soil and then by V * BD you can find the mass of the soil per ha. Generally, 1 ha soil with 15 cm depth is equal to 2 million kgs. For converting g/kg into kg/ha, you should be aware of the bulk density or the depth to get the final soil volume.

So an acre is 4840 square yards. If you cover it 1 yard deep, that's 4840 cubic yards. If you cover it 2 yards deep, that's 9680 cubic yards.

A cubic yard measures volume where a ton measures weight. A yard of topsoil usually weighs about 1,800 pounds and a yard of gravel usually weighs about 2,200 pounds.

The right amount of sensors is depending on the crop, the size of the watering sections, and the amount of variaties within a section. As a rule of thumb, we suggest 4-6 sensors per hectare (2-3 sensors per acre).

How many pounds of fertilizer do you put per acre? ›

Second: Since there are 43,560 sq ft in an acre, multiply the amount of fertilizer needed per 1000 sq ft by 43,560, then divide by 1000. (4.7 lb fertilizer x 43,560 sq ft) ÷ 1000 = 205 lb of a 16-8-8 fertilizer will be needed per acre.

Traditionally, manure application rates have been based on nitrogen. Applications of 30 tons per acre per year often are recommended to increase the organic matter content of soils.

One acre of soil to a depth of 6 inches weighs about 2 million pounds or 2 × 10⁶ Ib. One acre of soil up to 15 cms or 6 inches would be 8,96,000 kgs.

One inch of rain falling on 1 acre of ground is equal to about 27,154 gallons and weighs about 113 tons. An inch of snow falling evenly on 1 acre of ground is equivalent to about 2,715 gallons of water.

Water has a density of about 1 gram per cubic centimeter, while soil has a density that varies depending on its composition (sand, silt, clay, organic matter, etc.). Soil density typically ranges from 1.2 to 1.6 grams per cubic centimeter. So, in general terms, soil is denser and heavier than water.

If you can picture a football field, that's pretty close to an acre in size. Officially, it is 43,560 square feet, and a football field is 48,000 square feet. Our standard acre isn't the same worldwide. Irish and Scottish acres are bigger than those in the US.