COVERAGE CHART | Southwest Landscaping Materials (2024)

COVERAGE CHART | Southwest Landscaping Materials (2024)

FAQs

COVERAGE CHART | Southwest Landscaping Materials? ›

27 cubic feet = 1 cubic yard

1 cubic yard of material will cover approximately 100 square feet 3″ deep. For soil and sand caluclations, add an extra 25% to allow for settling and packing.

How many square feet will a 40 lb bag of rock cover? ›

Guide To Mulch & Landscape Products
ItemSizeCoverage
Canadian Peat Moss3.8 cf. bale100 square feet
Straw1 bale300-400 square feet
Chips, rocks, and stones0.5 cf. bag or 40 pound bag4 square feet at 1.5 inches deep
Garden Fertilizer50 pound bag2000 square feet
11 more rows

How much does 1 cubic yard cover? ›

27 cubic feet = 1 cubic yard

1 cubic yard of material will cover approximately 100 square feet 3″ deep. For soil and sand caluclations, add an extra 25% to allow for settling and packing.

How much will 20 tons of gravel cover? ›

Using 2 inches for the depth, the following measurements are a guide to the amount of gravel coverage per ton: 1/4 to 1/2 inch gravel, 100 square feet per ton; 1/2 to 1 inch gravel, 90 square feet per ton; and 1 1/2 to 2 inches gravel, 80 square feet per ton.

How many square feet does a yard of material cover? ›

A yard of any material will cover approximately 100 square feet at 3 inches of depth.

How do I calculate how much landscape fabric I need? ›

To calculate how much fabric is needed for landscaping, determine the coverage area's length and width. Multiply these values to find square footage of the space. To account for staples, uneven surfaces, and overlapping edges, allow for at least 8 inches of overlap if using multiple pieces.

How many square feet will a 50 pound bag cover? ›

A 50 lb bag of Quikrete typically covers about 0.375 cubic feet or approximately 8.5 square feet at a thickness of 2 inches . However , the exact coverage may vary depending on the consistency and application of the concrete mix .

How many 40lb bags of topsoil does it take to make a yard? ›

There are roughly 27 cubic feet in a yard, and a 40-pound sack of dirt commonly covers around 0.75 cubic feet. This really intends that there are roughly 36 sacks of dirt in a yard.

How much gravel do I need to cover a 10x10? ›

Calculate gravel volume: 10 ft × 10 ft × 0.166 ft = 16.667 cubic feet. Convert to cubic yards: 16.667/27 = 0.617 cubic yards. Multiply by gravel density in lb/cu yd: 0.617 × 2831.73 = 1750 lb = 0.794 tons.

How many wheelbarrows full is a cubic yard? ›

Your typical wheelbarrow holds 4-5 cubic feet of material or 1 cubic yard could fill approximately 7-9 wheelbarrow loads. A typical pickup truck with a 6ft bed can hold 2-3 CY. An 8ft bed can hold 3-4CY.

Will a cubic yard fit in a pickup? ›

The bed of a full size standard pickup has dimensions of: 8' long X 5.33' wide X 1.5' high. When loaded level full, a truck of this size will hold 2.5 cubic yards of material.

What does 20 cubic yards look like? ›

A cubic yard is a dirt pile 3 feet wide, 3 feet long and 3 feet tall, so 20 cubic yards is a pile 15 feet long, 12 feet wide, and 3 feet tall. A small dump truck holds 5 cubic yards, although many companies provide larger trucks holding up to 10 or more cubic yards.

How far will 1 ton of gravel spread? ›

As a general guide, one ton of gravel typically covers approximately: 100 square feet at a 2-inch depth. 80 square feet at a 3-inch depth. 60 square feet at a 4-inch depth.

How much gravel is in a dump truck? ›

Typically, larger dump trucks can carry about 28,000 pounds or about 14 tons. On average, smaller dump trucks can transport around 13,000 to 15,000 pounds or 6.5 to 7.5 tons.

How do you calculate yard of material? ›

How big is a yard of fabric? A yard of fabric is 36 inches or 3 feet. Once you know the amount of material you have in inches, you should divide that by 36 to find the number of yards.

How much should I mark up landscape materials? ›

Your markup needs to be applied on top of the total cost to you to perform the job. This way, you'll always be making a profit. Charge at least a 15% to 20% markup on residential landscaping jobs and 10% to 15% on commercial landscaping jobs, says Lawn & Landscape.

How construction material is calculated? ›

You could either use a past job for this calculation or manually add up all the materials to verify the costs.
  1. Calculate the total material costs for completing a specific job. ...
  2. Divide the material costs by the total square footage of the job.
  3. Now you've got the average price per square foot for materials.
Sep 13, 2022

How do you calculate material value? ›

To calculate the material cost, multiply the total quantity of material by the cost per unit of material.

Top Articles
Latest Posts
Article information

Author: Dong Thiel

Last Updated:

Views: 6221

Rating: 4.9 / 5 (79 voted)

Reviews: 94% of readers found this page helpful

Author information

Name: Dong Thiel

Birthday: 2001-07-14

Address: 2865 Kasha Unions, West Corrinne, AK 05708-1071

Phone: +3512198379449

Job: Design Planner

Hobby: Graffiti, Foreign language learning, Gambling, Metalworking, Rowing, Sculling, Sewing

Introduction: My name is Dong Thiel, I am a brainy, happy, tasty, lively, splendid, talented, cooperative person who loves writing and wants to share my knowledge and understanding with you.