For many, homemade fudge and the holidays go hand-in-hand. Even if each family has its own recipe, making fudge isn’t always easy. So we've put together a comprehensive guide for you with proven, science-based tips and tricks for successful fudge, every time!
Fudge basics
Ingredients
“Real” fudge is nothing more than white sugar, brown sugar and, you guessed it, cream. A bit of vanilla or maple extract for flavour, nuts if you desire, and you have that sweetest of sweet treats found in so many Canadian homes. Other ingredients can be added depending on the recipe you’re working with: icing sugar, maple syrup, corn syrup, evaporated milk, marshmallows. Ricardo even adds white chocolate.
Desired texture
What do you look for in a piece of fudge? It should hold together well without being too hard and, above all, has to be melty and silky in your mouth. It’s the size of sugar crystals that makes the knees of fudge lovers buckle…the smaller the crystals, the less they are perceived on the tongue and the more the fudge tastes smooth and creamy. Cooking, and beating after cooking, is the key to successful fudge.
Cooking
Cooking is necessary to dissolve sugar crystals and to evaporate part of the water in the cream. The length of this step has a direct impact on the firmness of the fudge. As water gradually evaporates, sugar is concentrated and the temperature of the mixture rises above 100°C (212°F). If there is too much evaporation, when the cooking time is too long, there will not be enough water left in the fudge and it will be too hard. Conversely, if the cooking time is too brief and there is not enough evaporation, too much water will remain and the fudge will be too soft. A temperature of 112°C to 114°C (234°F to 237°F) must be maintained. This will ensure the fudge has the ideal concentration of water and sugar.
Candy Thermometer
Fudge is difficult to make. Don’t rely on recipes that tell you to boil the fudge mixture for a specific amount of time. There are too many unknowns to set an exact time. Cooking time depends on the size of your pan—the bigger it is, the more evaporation will occur—plus the heat intensity or power level of your microwave. The best way to check if it’s done is to measure with a candy thermometer or do a cold water test.
Online store
Silicone Thermometer Spatula
Valuable tips for successful fudge
1. Don’t stir during cooking
Fudge can be cooked on the stove or in the microwave. The advantage of using a microwave is that the mixture will not stick to the bottom of the pan during cooking. In both cases, sugar and cream must be brought to a boil by gently stirring, then—and this is very important—refrain from stirring again throughout the rest of the cooking process. Sugar crystallization causes a chain reaction: If a crystal is present in the mixture, other sugar molecules will attach to it and the mixture may seize and become grainy.
2. Avoid crystallization
During cooking, sugar crystals can stick to the sides of the pan. If you stir the mixture, these crystals could fall in and crystallize a part of the sugar again. To work around this issue and dissolve all crystal traces, brush the sides of the pan with a brush dipped in water at the beginning of the cooking process.
3. Let cool before beating
After being cooked, the sugar must crystallize again to create fudge. This stage will determine the size of the sugar crystals. The sugar should ideally form small crystals that are barely discernible on the tongue. To achieve this, let the mixture cool for 15 minutes before beating it. It will thicken as it cools, so when you beat the mixture, sugar molecules will have a tough time clinging to one another (it’s like trying to swim in molasses!). The result: crystals that form will stay small. Experience has shown that you should beat the mixture when its temperature ranges from 43°C to 45°C (110°F to 113°F), which normally occurs 15 minutes after the pan is removed from heat. The fudge is warm, but not burning hot.
4. Beat the mixture
After letting the fudge cool, it’s time to beat it. It is important to stir constantly with a wooden spoon until the mixture starts to thicken and its surface starts to look dull or matte. Now is the time to stop beating and pour the fudge into a mould. Another tip: Do not scrape the sides of the pan or the spoon used for stirring. They are often covered with a grainier layer of fudge.
In Summary
- • Use a heavy pan that distributes heat well or the mixture may stick during cooking. This advice does not apply if you are making fudge in the microwave.
- • Brush the sides of the pan with a wet brush at the beginning of cooking to dissolve sugar crystals stuck to the sides.
- • Never stir the mixture during cooking or sugar could crystallize again. The mixture may seize and become grainy.
- • Use a candy thermometer or conduct a cold water test to check if the fudge is done. Do not rely on the cooking time indicated in your recipe. The fudge is ready when a candy thermometer reads between 112°C to 114°C (234°F to 237°F) or the mixture forms a soft ball in cold water.
- • Let the mixture cool before beating. The temperature at this point should be 43°C to 45°C (110°F to 113°F). The fudge should be warm but not burning hot.
- • Stop beating when the surface of the mixture starts to look dull or matte. Pour immediately into a mould that has been buttered or lined with parchment paper and let cool completely.
The cold water test
Even without a candy thermometer, you can still check if the fudge is cooked by doing a cold water test. Drop a piece of hot fudge into a glass filled with ice water. It should form a soft ball that can easily flatten between your fingers. Repeat this test every two minutes, each time using a clean spoon, until the fudge has the desired consistency.
Ready to make some fudge? Here are a few recipes to satisfy your sweet tooth:
Maple Fudge
Maple Syrup Fudge
The best
Maple Fudge (The Best)
ALLERGY-FRIENDLY
Dairy-Free and Nut-Free Sugar Fudge
GOURMET GIFTS
Creamy Fudge with Peanuts
FAQs
It might be that you haven't dissolved all the sugar before boiling the fudge mixture. It could be that there just wasn't enough fluid or fat to enable the sugar to dissolve or it might even be that the fudge wasn't beaten long enough or hard enough. All of these factors could be the cause of grainy fudge.
What happens if you don't beat fudge long enough? ›
It might be that you haven't dissolved all the sugar before boiling the fudge mixture. It could be that there just wasn't enough fluid or fat to enable the sugar to dissolve or it might even be that the fudge wasn't beaten long enough or hard enough. All of these factors could be the cause of grainy fudge.
What is the secret to smooth fudge that is not gritty? ›
Once the sugar has dissolved and the mixture has come to a boil, do not stir it. If you do, the sugar can crystallize, giving your fudge a gritty texture. As you beat the fudge, pay attention to color and texture. Once the fudge loses its sheen and thickens, put down your spoon.
When to stop beating fudge? ›
Once the mixture has cooled enough, use a wooden spoon or an electric hand mixer to beat the fudge until you see the very first signs of the mixture shifting from glossy to matte. Believe yourself when you think you see them! If you over-mix the fudge it will set in your pot.
What happens if you beat fudge too soon? ›
Sugar Crystals Formed
It's important to beat the fudge ingredients to develop the right texture, but you won't get smooth, creamy fudge if you beat it when it's too hot. Beating fudge when it's still over heat creates sugar crystals, aka the grittiness you feel in the fudge.
How do you know when fudge is beaten enough? ›
After letting the fudge cool, it's time to beat it. It is important to stir constantly with a wooden spoon until the mixture starts to thicken and its surface starts to look dull or matte. Now is the time to stop beating and pour the fudge into a mould.
Should you stir fudge while it's boiling? ›
Stir the ingredients to dissolve the sugar until the mixture comes to a boil. If your recipe uses milk, stirring will keep the mixture from curdling. But once it reaches about 236–238 degrees F/113–114 degrees C (the "soft-ball" stage), do not stir it or even shake the pan.
Why is my 3 ingredient fudge not setting? ›
Why won't my 3 ingredient fudge set? This often happens when the condensed milk and chocolate chip mixture isn't hot enough to start. Everything must be completely melted before it is transferred to the pan to cool.
How to fix failed fudge? ›
The solution? A fudge do-over. Even though it set up properly, I threw it back into a saucepan with about 1 1/2 cups of water and gently heated the mixture to dissolve the fudge into the water. From there, I pretty much re-did the whole cooking process.
What is the soft ball test for fudge? ›
For perfect fudge, the syrup should form a soft ball that can be picked up, but easily flattened. If the syrup is undercooked, drops of syrup will sink to the bottom of the glass in threads or simply dissolve. If the syrup is overcooked, the ball will be hard and difficult to flatten with your fingers.
How long does it take to make fudge:
- about 18 min to reach boiling.
- about 40 minutes to reach soft ball stage.
- 60 minutes to cool.
- 28 minutes to beat in a KitchenAid (your time for this may vary)
- 4 hours to set.
Once a seed crystal forms, it grows bigger and bigger as the fudge cools. A lot of big crystals in fudge makes it grainy. By letting the fudge cool without stirring, you avoid creating seed crystals. Stirring would help sucrose molecules "find" one another and start forming crystals.
Can you reboil fudge that hasn't set? ›
How can you fix soft fudge? Put it in a microwave safe bowl that is large enough that it won't boil over. Reheat it to the boiling point and cook for about 3 more minutes. Then you can beat some powdered sugar into it if this doesn't make it set.
What should fudge look like after beating? ›
Beat the mixture until it just loses it's shine and becomes very thick (this should take about 5-10 minutes). The longer you beat once it starts to thicken then the more crumbly the final fudge will be. If you like it smooth - beat it only until comes away from the sides of the pan and sticks well to the spoon.
Why isn't my fudge hardening? ›
The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.
What happens if you don't stir fudge? ›
By letting the fudge cool without stirring, you avoid creating seed crystals. Stirring would help sucrose molecules "find" one another and start forming crystals. Stirring also introduces air, dust, and small dried bits from the walls of the saucepan—all potential seeds for crystal formation.
What happens if you undercook fudge? ›
Undercooked. This fudge was cooked until the temperature reached only108 °C (226 °F). At this temperature, the sugar is not concentrated enough... there is too much leftover water in the syrup and the resulting fudge is soft.
Can I reheat fudge that is too grainy? ›
Pour the fudge back into your pan, and add about a cup of water to it, along with a tablespoon or two of evaporated milk, whipping cream, or whatever cream you're using. Some people skip the water and just add cream to the mixture to reheat.
Can I fix fudge that didn't set? ›
To fix it, you can reheat the fudge mixture over low heat and continue cooking until it reaches the proper temperature. Be sure to use a candy thermometer to monitor the temperature accurately. Alternatively, you can try to salvage chewy fudge by mixing it into ice cream or using it as a topping for desserts.
