Irrigation Without Irritation: 3 Easy DIY Plant Watering Systems (2024)

Irrigation Without Irritation: 3 Easy DIY Plant Watering Systems

Drip irrigation systems may seem a bit complicated at first glance, but the truth is, they can really simplify your life. Plus, if you make your own DIY plant watering system, you can save yourself a ton of cash! Plants rely on us for consistent watering schedules, but it’s easy to get caught up in our other responsibilities, and sometimes our gardening duties fall to the wayside. While many plants can bounce back after a brief period of drought, some plants like tomatoes will throw a fit pretty quickly if they don’t get regular watering, and the signs of stress will show up quickly. Drama queens, am I right?

To save yourself the trouble of constantly fussing over your plants, set up a drip system to keep your plants consistently watered so that you can get back to more pressing matters, like binge-watching reality shows on Netflix! Here are some easy DIY irrigation methods that will save you loads of trouble.

Homemade Drip Irrigation Hose

Turning a regular hose into a soaker hose for your garden or lawn is actually pretty simple! You just need a hose, a cap to screw on the end, and a drill to make some holes. Putting the cap on the hose will force the water to come out the holes, so if you snake the hose through your plants, the water will be distributed evenly.

Using a ¼ inch-wide drill bit, make evenly spaced holes all along the same side of the hose. If your garden is really big, you might want to attach a second hose. Once it’s all hooked up, turn on your hose just a little bit, so the water starts trickling out. Don’t turn it on full blast—this is a drip system, not a geyser.

Leave it on for about half an hour at a time, and run it every couple of days, depending on how much rain you’re getting. If you’re worried about forgetting it and leaving it on for too long, you can purchase a timer that will shut it off automatically.

Irrigation Without Irritation: 3 Easy DIY Plant Watering Systems (2)

DIY Gravity Drip Irrigation

Harness the power of gravity to water your plants with this cool project that feels like something you’d make for a junior high science fair! All you need is a large bucket, some ¼ inch tubing, silicone caulk, and a ½ GPH dripper (the GPH stands for gallons per hour—the amount of water that will be released). Run the tubing through the bottom of the bucket (make sure to caulk around the tubing to keep things watertight), attach the dripper, elevate the bucket, and place the dripper end in the spot where you want the water to be released.

You can connect multiple hoses to the same bucket in varying lengths to reach different spots in your garden, but if the garden is pretty big, you’ll probably want to use a couple of buckets. Fill the buckets up with the amount of water you want to deliver to your plants, and then just let it do its thing! This method of consistent, steady watering will definitely keep your plants content.

Irrigation Without Irritation: 3 Easy DIY Plant Watering Systems (3)

DIY Drip Irrigation System For Potted Plants

This is an awesome method for keeping your plants watered while you’re away on vacation! All you need is a two-liter plastic bottle, a lighter, a pin, a small stake or skewer, and some tape. Remove the plastic cap from the bottle, heat up the pin in the flame of the lighter, and then poke four holes in the cap. Fill the bottle with water, place the cap back on, and then hold it upside down.

For the first few seconds, water will start to pour out, but after a moment, it will create a vacuum inside the bottle, and the water flow will stop. Tape the stake to the bottle, so it extends about 4–6 inches from the cap. Press it into the soil so that the cap is slightly lower than the soil surface, but not too close to the plant, to avoid disturbing the roots.

As the sun heats up the bottle, this will create pressure inside that helps to release the water over time slowly. Leave it for a week, and you’ll come back to evenly watered potted plants!

Irrigation Without Irritation: 3 Easy DIY Plant Watering Systems (4)

Need some supplies or further advice to get started on your self-watering garden? Feel free to visit us or give us a call at the store—we’ve still got delivery and curbside pickup options available to make your shopping as simple as possible!

Irrigation Without Irritation: 3 Easy DIY Plant Watering Systems (2024)

FAQs

How to make a water wick for plants? ›

Take a ⅛ to ¼ inch (3-6 mm) thick nylon rope and snip off a long enough section to insert one end into the middle of your plant and the other into a vessel of water below it. Make a knot on one end of the wick and place it in a bowl of water.

What is the easiest drip irrigation system to use? ›

Soaker hoses are the simplest way to create drip irrigation. These garden hoses have tiny holes along their length to allow water to drip out.

What liquid is best for watering plants? ›

Distilled water is healthy for your houseplants because it's free from chemicals, metals, and other impurities.

How to make a smart plant watering system? ›

Automatic Plant Watering System circuit

The circuit comprises an Arduino UNO board, a soil moisture sensor, a servo motor, a 12V water pump, and an L293D (IC1) motor driver IC to run the water pump. You can power the Arduino board using a 7V to 12V wall wart or plug-in adaptor or solar panel.

What is the best wick for self-watering? ›

I prefer 7/16-inch or 1/2-inch solid-braid nylon rope, but polyester and other fiber tapes and ropes may work. Cotton wicks were traditionally used in India, but I've found nylon and polyester braided ropes are less likely to get moldy and clog when used for wick watering.

How do you make a slow release plant waterer? ›

To make your own slow drip watering system for plants in your garden:
  1. Punch several small holes in the bottom of a plastic milk jug or juice container.
  2. Dig a hole next to the plant large enough for the jug.
  3. Place the jug in the hole with the top on so the top protrudes above ground level.
Oct 16, 2023

How to make a homemade watering can? ›

Using a nail and a hammer, carefully nail into the zinc lid of the mason jar. Stick to just a few holes, as nails can be pretty wide, and you don't want to make your plants too wet. Once you're finished, just screw the lid on, and you're good to go. Easy as can be.

Which is the simplest and cheapest method of irrigation? ›

Flood (furrow) irrigation:

The system is called flood irrigation -- water is pumped or brought to the fields and is allowed to flow along the ground among the crops. This method is simple and cheap, and is widely used by societies in less developed parts of the world as well as in the U.S.

What is the simplest and cheapest source of irrigation? ›

Merits: Well is simplest, cheapest and independent source of irrigation and can be used as and when the necessity arises. Several chemicals such as nitrate, chloride, sulphate, etc. found in well water add to the fertility of soil.

How to make a self-watering plant system? ›

All you need is a two-liter plastic bottle, a lighter, a pin, a small stake or skewer, and some tape. Remove the plastic cap from the bottle, heat up the pin in the flame of the lighter, and then poke four holes in the cap. Fill the bottle with water, place the cap back on, and then hold it upside down.

How to keep potted plants watered while away? ›

Fill up your sink or bathtub with a few inches of water and lay a towel inside to protect against scratches. Rest your potted plants in the sink and leave them there while you're gone. The soil will draw water up to the roots, keeping the plant hydrated for up to one week.

Top Articles
Latest Posts
Article information

Author: Chrissy Homenick

Last Updated:

Views: 6287

Rating: 4.3 / 5 (54 voted)

Reviews: 93% of readers found this page helpful

Author information

Name: Chrissy Homenick

Birthday: 2001-10-22

Address: 611 Kuhn Oval, Feltonbury, NY 02783-3818

Phone: +96619177651654

Job: Mining Representative

Hobby: amateur radio, Sculling, Knife making, Gardening, Watching movies, Gunsmithing, Video gaming

Introduction: My name is Chrissy Homenick, I am a tender, funny, determined, tender, glorious, fancy, enthusiastic person who loves writing and wants to share my knowledge and understanding with you.