Fudge Problems? Learn How to Fix Them. (2024)

Fixing Soft or Grainy Fudge

By

Elizabeth LaBau

Fudge Problems? Learn How to Fix Them. (1)

A professional pastry chef, cookbook author, and writer, Elizabeth LaBau has published more than 600 articles on baking and candy making.

Learn about The Spruce Eats'Editorial Process

Updated on 01/5/20

Trending Videos

Fudge Problems? Learn How to Fix Them. (2)

If you're having trouble with your fudge, you're probably following a recipe for old-fashioned fudge—candy cooked to a specific temperature, cooled, then beaten until thick. Old-fashioned fudge can be fussy, especially on your first or second attempt. Some home cooks complain that their fudge is grainy, crumbly, or burnt while others complain that their fudge never sets properly. If you've encountered one of these problems, don't worry—you can probably save your fudge.

None of the following solutions or tips applies to the so-called quick fudge that involves marshmallow fluff or condensed milk. In fact, if you're nervous about trying to make old-fashioned fudge again, you should start with one of those foolproof recipes.

Fixing Fudge

Sometimes old-fashioned fudge never sets, even after hours in the refrigerator. You wait patiently, only to discover that it's still a sticky, gummy mess. But don't despair or throw out the entire pan of fudge: You can probably remedy the situation.

Fudge usually behaves this way when it's not cooked to a high enough temperature (due to oversight or a faulty candy thermometer).

If your fudge is tough, hard, or grainy, then you may have made one of several mistakes: You may have overcooked it, beaten it too long, or neglected to cool it to the proper temperature. Don't throw out the whole pan, because you may be able to melt the fudge down and try again. Of course, if your fudge has a distinctly burnt or scorched flavor, you'll have to start over with a fresh batch.

To fix soft fudge or hard fudge, simply follow these easy steps:

  1. Scrape the fudge back into a large saucepan and add 1 1/2 cups of water.
  2. Stir the fudge over low heat until it dissolves. Carefully taste the mixture, as the water probably diluted the flavor. Add more flavorings if necessary.
  3. Increase the heat to medium and bring it to a boil, washing down the sides of the pan frequently with a wet pastry brush to prevent sugar crystals from forming. Do not stir the fudge.
  4. Cook it to the proper temperature specified in the recipe (most likely between 237 F and 239 F).
  5. Take it off the heat, and follow the recipe's instructions for cooling and beatingthe fudge. As you beat the candy, remember that the mixture should lose its sheen and thicken before you pour it into the pan.

Tips for Fudge Makers

  • Before you make another batch of fudge, it's a good idea to test your candy thermometer. Place it in boiling water to make sure that it registers 212F. If it doesn't, you should calibrate it or invest in a new one. Many people overcook fudge because of faulty or broken thermometers.
  • Once the sugar has dissolved and the mixture has come to a boil, do not stir it. If you do, the sugar can crystallize, giving your fudge a gritty texture.
  • As you beat the fudge, pay attention to color and texture. Once the fudge loses its sheen and thickens, put down your spoon. If you continue to beat the fudge, it will go from “perfect” to “rock hard” in minutes.
  • If you're making a lighter fudge that doesn't involve any chocolate, you might notice that the recooked batch has a darker, brownish color, thanks to caramelized sugar crystals. This change may alarm you, but the fudge should still have a lovely, mellow flavor and silky texture.
Fudge Problems? Learn How to Fix Them. (2024)

FAQs

How do I fix messed up fudge? ›

To fix oily, hard or grainy fudge, scoop the fudge back into a pot with about a cup of water. Cook it over low heat until the fudge dissolves. Then bring the fudge back up to the temperature specified in the recipe and follow the remaining steps. The flavor may be slightly diluted, but the texture will be improved.

Can I fix fudge that didn't set? ›

OPTION 3) Sieve together some powdered sugar and cocoa powder, and gradually work this into your unset fudge until it reaches the consistency of dough, then roll out and cut into squares, or shape into balls and then roll in powdered sugar (roll the balls in icing sugar, not yourself).

What causes fudge not to harden? ›

Homemade Fudge Doesn't Always Set

If your fudge doesn't firm up after a few hours, you either have too high an amount of liquid to sugar, or your mixture hasn't reached the soft-ball stage. Using a candy thermometer can help home cooks avoid this problem.

What to do with failed fudge? ›

My advice to you is to just pour it in a jar, call it something else delicious, and pretend you meant for it to be that way. The nice thing about my “failed” fudge is that it tastes absolutely delicious! A spoonful of the delectable treat will make you want for more. It's all in your perspective.

How do you fix fudge that is too sweet? ›

So I think you could temper the sweetness by combining a fudge recipe with something like sesame halwa, or by adding peanut flour as a substitute for some of the sugar. If you use light-colored peanut flour I don't think it would even affect the taste too much (other than reducing the sweetness, of course).

What happens if you don't stir fudge? ›

By letting the fudge cool without stirring, you avoid creating seed crystals. Stirring would help sucrose molecules "find" one another and start forming crystals. Stirring also introduces air, dust, and small dried bits from the walls of the saucepan—all potential seeds for crystal formation.

Can I put fudge in the fridge to set? ›

Pour the fudge mixture into the prepared casserole dish and spread out in an even layer. Let the fudge rest at room temperature for 15 minutes before placing in the refrigerator, uncovered. Refrigerate until the fudge is firm, about 2-3 hours (or overnight), before slicing and serving.

Why won't my 3 ingredient condensed milk fudge set? ›

This often happens when the condensed milk and chocolate chip mixture isn't hot enough to start. Everything must be completely melted before it is transferred to the pan to cool. Heat in 30-second bursts in the microwave, stirring well between each to ensure everything is melting evenly.

What not to do when making fudge? ›

Avoid Stirring Once the Mixture Comes to a Simmer

Another key part of a successful fudge texture is when you stir the mixture. Stirring the sugar and milk during the initial stages of cooking allows the sugar to dissolve. However, once the mixture comes to a boil, it's time to put the spoon down.

What ingredient makes fudge hard? ›

As water gradually evaporates, sugar is concentrated and the temperature of the mixture rises above 100°C (212°F). If there is too much evaporation, when the cooking time is too long, there will not be enough water left in the fudge and it will be too hard.

Why is my fudge a little soft? ›

If the fudge is very soft and slightly chewy then it is possible that it did not quite cook to soft ball stage and next time the mixture should be cooked to a slightly higher temperature (soft ball is 112-116c/235-240F and a sugar or candy thermometer can help).

Do you stir fudge while it is boiling? ›

Stir the ingredients to dissolve the sugar until the mixture comes to a boil. If your recipe uses milk, stirring will keep the mixture from curdling. But once it reaches about 236–238 degrees F/113–114 degrees C (the "soft-ball" stage), do not stir it or even shake the pan.

What is the soft ball test for fudge? ›

making of fudge

… termed in kitchen parlance the soft ball stage, that point between 234 and 240 °F (112 and 115 °C) at which a small ball of the candy dropped in ice water neither disintegrates nor flattens when picked up with the fingers.

How long do you boil fudge to get to soft ball stage? ›

How long does it take to make fudge:
  1. about 18 min to reach boiling.
  2. about 40 minutes to reach soft ball stage.
  3. 60 minutes to cool.
  4. 28 minutes to beat in a KitchenAid (your time for this may vary)
  5. 4 hours to set.

How do you rescue unset fudge? ›

To fix it, put it back into the saucepan and add about 3–4 US tbsp (44–59 ml) of 35% fat whipping cream. Stir the mixture as you heat it until the sugar in the fudge is melted. Then, stop stirring and let the fudge boil until it reaches 237–239 °F (114–115 °C).

How do you make fudge moist again? ›

You could also gently heat the fudge with some moisture. This could be done: In the microwave - microwave in short increments with a glass of (warm) water, which creates steam for the fudge to absorb, until the fudge no longer feels/looks dried out.

How do you fix seized chocolate fudge? ›

Funnily enough, it's super simple. First boil some water. Second, very slowly, as in 1-2 tsp at a time add in the boiling water and whisk the chocolate vigorously until the mixture is smooth again. The hot water will essentially melt the clumps back to a liquid consistency.

Top Articles
Latest Posts
Article information

Author: Dr. Pierre Goyette

Last Updated:

Views: 5882

Rating: 5 / 5 (70 voted)

Reviews: 93% of readers found this page helpful

Author information

Name: Dr. Pierre Goyette

Birthday: 1998-01-29

Address: Apt. 611 3357 Yong Plain, West Audra, IL 70053

Phone: +5819954278378

Job: Construction Director

Hobby: Embroidery, Creative writing, Shopping, Driving, Stand-up comedy, Coffee roasting, Scrapbooking

Introduction: My name is Dr. Pierre Goyette, I am a enchanting, powerful, jolly, rich, graceful, colorful, zany person who loves writing and wants to share my knowledge and understanding with you.